Press "Enter" to skip to content

Archives: microBLOG

2013 City of Grand Junction Calendar

Anasazi Photography: Blog Images &emdash;
The 2013 City of Grand Junction calendar has been out for a little while now, so I thought I’d make a quick post to show off my photos that were chosen. Each year the City of Grand Junction creates a calendar that they send out to everyone in the city. This is the first year I have submitted photos for use in this calendar since I didn’t have many local photos that I thought were good enough to submit before. I made an effort over the last year to concentrate on making some local images so that I could finally submit a few. They ended up choosing two of my photos for the calendar, so I guess the extra effort paid off.

I have a small photo of a Ute petroglyph panel in Big Dominguez Canyon for the month of February, which is nice since my birthday is also in February.

The second photo chosen is one of my favorites from this last monsoon season at the Colorado National Monument. Even though this photo is at the very end, it’s the only other full-sized photo in the calendar besides the cover. Plus, if anyone is looking up a city phone number they will see it.

Anasazi Photography: Blog Images &emdash;

If you do not live within the city limits but would like to pick up a copy of the calendar, you can also stop by and get one for free at City Hall.

Leave a Comment

My Campsites of 2012

Since I’m pretty sure my camping season is over for this year, I thought it would be fun to share photos of some of my campsites. I ended up camping 41 nights this year which is well over a month spent sleeping out in the backcountry. I’m looking forward to trying to beat that number in 2013. Two of those nights were spent sleeping out under the stars on my Tent Cot without the tent part setup, which was a first for me.

Morning Camp
Muley Point, April 2012

Dominguez Camp
Big Dominguez Canyon, April 2012

Peekaboo Camp
Peekaboo, May 2012

Gray Copper Camp
Gray Copper Gulch, June 2012

Good Morning
Cottonwood Canyon, July 2012

Stevens Gulch Camp
Stevens Gulch, July 2012

Paradise Camp
Paradise Divide, July 2012

Morning Camp
Clear Lake, August 2012

Lower Ice Camp
Lower Ice Lake Basin, August 2012

Taylor Camp
Taylor Lake, August 2012

Hancock Camp
Hancock Lakes, August 2012

Rattlesnake Camp Sunrise
Rattlesnake Canyon, August 2012

Black Rocks Morning
Black Rocks, August 2012

Saddle Mountain Camp
Saddle Mountain, September 2012

Mineral Creek Camp
Mineral Creek, September 2012

Kebler Camp
Kebler Pass, September 2012

Vista Point Camp
Vista Point, September 2012

Vermilion Camp
Grand Staircase, October 2012

Morning View
Alstrom Point, October 2012

Alstrom Point Camp
Alstrom Point, October 2012

Wet Camp
Cedar Mesa, October 2012

As you can see from the photos above, I managed to use all 4 of my tents this year, multiple times. Nothing beats my Kamp-Rite Tent Cot for camping out of my Jeep when I am alone, but the new Big Agnes Jupiter’s Cabin is nice and roomy. I also got to use my Big Agnes Copper Spur UL1 a couple of times, which is great for my backpacking trips.

Leave a Comment

Bag Night Challenge 2012

Paradise Camp

Since I’ve been keeping track this year and I don’t think I’ll be getting out again, here are my camping stats for 2012. It was a pretty great year!

Total: 41 Nights

April 7-8 | Comb Wash | 1 Night
April 21-22 | Muley Point | 1 Night
April 28-29 | Dominguez Canyon | 1 Night
May 5-6 | Indian Creek | 1 Night
May 18-20 | Coyote Valley | 2 Nights
May 29-28 | Devils Kitchen & Peekaboo | 2 Nights
June 8-10 | Cedar Mesa | 2 Nights
June 16-17 | Gray Copper Gulch | 1 Night
June 23-24 | Mineral Creek | 1 Night
June 29-30 | Nellie Creek | 1 Night
July 13-15 | Cottonwood Canyon & Peekaboo | 2 Nights
July 20-21 | Stevens Gulch | 1 Night
July 28-29 | Paradise Divide | 1 Night
August 4-5 | Big Flat | 1 Night
August 10-12 | Clear Lake & Lower Ice Lake Basin | 2 Nights
August 17-19 | Taylor Lake & Hancock Lake | 2 Nights
August 24-26 | Ruby – Horsethief Canyons | 2 Nights
August 31-September 3 | Stud Horse Point, State Line & Saddle Mountain | 3 Nights
September 15-16 | South Mineral Creek | 1 Night
September 21-23 | Kebler Pass | 2 Nights
September 29-30 | Vista Point | 1 Night
October 6-13 | Arizona Strip & Southern Utah | 7 Nights
November 1-4 | Beef Basin | 3 Nights

Leave a Comment

Building My Perfect Backcountry Tripod

Shadow Photographer

Over the past few years I’ve been using a Manfrotto ballhead and carbon fiber tripod combination that really started to frustrate me in the field. Earlier this year I decided it was time to invest in a new tripod and ballhead setup that would work much better for me. Before I started researching which components to buy, I sat down and figured out exactly what requirements I needed this new tripod to meet, and came up with the following:

  • Lightweight: Since I spend much of my time hiking in the backcountry, both the tripod and ballhead need to be light, especially since this tripod will be accompanying me on long day-hikes and backpacking trips.

  • Tall: I’m a pretty tall guy at 6’5″ and wanted a tripod that would get as close to my eye level as possible so that I would not have to hunch over too much while taking photos. I also wanted it to be tall without the use of an extended center column since that would just add extra weight and make the tripod more unstable.

  • Compact: I know this is counter-intuitive to my previous requirement, but I also wanted to find a tripod that would fold up pretty compact so that it would easily fit on whatever backpack I would be using.

  • Twist-Locks: The flip-locks on my previous Manfrotto tripod were a major source of frustration for me. I would frequently find myself needing to setup the tripod quickly to catch the changing light, only to get slowed down while trying to extend the legs. I knew that I would want twist-locks on the legs of my new tripod to make extending them quicker. With the twist-locks I would be able to extend the legs quicker by unlocking all three locks on each leg at the same time.

  • Quality & Toughness: I needed my new tripod to be tough and of good quality since I knew it would be getting knocked around in the field, in my Jeep and on my backpack.

You might notice that none of my requirements involve price. I learned a long time ago that if I want to be happy with a purchase, I need to make sure to get exactly what I want without worrying about the price, even if that means waiting a little longer to save up some extra money. I also knew that meeting these requirements wasn’t going to be cheap.

Here’s a rundown of each component that I ended up getting. Since I’ve now been using this tripod in the field for much of the year I will also give a little feedback on how each component has worked out for me.


Ballhead: Acratech GP-s

 Acratech GP-sAfter a lot of research, I decided to go with the Acratech GP-s Ballhead since there are quite a few features that I liked. The open design of the ball makes keeping it clean and working smoothly a breeze. This is especially helpful for me since it will frequently be in contact with sand, dirt and dust in the desert. There is also no dust-attracting grease required. The open design of the ball even allows more movement compared other ballheads on the market. The knobs are coated in rubber and are all different shapes and sizes making them easy to operate without looking. This feature-filled ballhead weighs in at just under a pound and supports up to 25lbs. It’s also worth mentioning that this ballhead has a panning base and offers the ability to function as both a gimbal head and a leveling panoramic head.

Quick Review: I absolutely love this ballhead! It’s so easy to operate in the field and never gets dirt trapped in the ball, so it’s always smooth to adjust. I also love the extra movement allowed by the open design. This piece of gear is very tough and has survived getting knocked around quite well, with only a few nicks and scratches in the powder-coating. Of course, it’s also lightweight which is great for carrying around on my backpack. I have used the panning base for a few panoramas and it has worked well. I even used the gimbal feature once when panning my camera vertically to create this image. I would highly recommend this ballhead for outdoor nature and adventure photographers.


Camera Plate: Really Right Stuff L-Bracket

Really Right Stuff L-BracketWhen I was deciding on a ballhead, I made sure to look for one that used the Acra-Swiss mounting system. I was tired of dealing with the loose fitting Manfrotto plates over the past few years and I wanted a system that locked the camera down tight. Another thing I didn’t like about my previous tripod was having to flop my camera 90 degrees into a notch when taking vertical photos, which I frequently do. This would throw the balance of my tripod off-center and make it unstable. With an L-Bracket I could just flip the camera 90 degrees on it’s side and still have it perfectly centered over the top of the tripod.

Quick Review: There’s not much to the Really Right Stuff L-Bracket. It’s just an aluminum bracket that mounts on the camera and stays there. I can say that it doesn’t get in the way of any of the functions of the camera, and doesn’t block access to any of the ports. It’s lightweight and doesn’t add too much bulk to the camera. It is noticeable that it’s on there, but I quickly got used to it. This bracket is tough and also helps to protect the camera. I’m afraid to say that my camera gets used and abused. It gets knocked around when I’m climbing over boulders and has even fallen off my tripod. The bracket has lost some of it’s powder coating, but has held up well to the abuse. I’ll never go without an L-bracket again!



Tripod Legs: Feisol Tournament Tripod CT-3442 Rapid

 Feisol Tournament Tripod CT-3442 RapidWhen I first started looking for some new tripod legs, I originally went to research Gitzo tripods. They are well-known for making the best tripods out there, so I assumed they would have what I was looking for. They made a few tripods that were close to what I wanted, but I would soon find out that Feisol actually had this model that matched my requirements even closer. I know quite a few people with these Feisol tripods, and all of them have nothing but good things to say about them, so I wasn’t worried about the quality. This tripod extends to 54.33″ without the center column, which was actually one of the tallest I was able to find (that didn’t weigh a ton), and it collapses down to 18.9″ which was also one of the shortest I was able to find. It accomplishes this feat because the legs fold back 180 degrees over the ballhead. This not only allows the tripod to fold down very small, it also has the added benefit of protecting the head. Even with all of these features, this tripod weighs in at only 2.3lbs, which makes it one of the lightest full-sized tripods I was able to find, too. The legs also have the twist-locks that I was looking for.

Quick Review: I’ve owned a few tripods over the years, but I have to say that this set of legs are the best I have used, by far! They are tough, easy to operate and even easy to clean. They extend pretty high, even for a tall guy like me, but still fold up shorter than most other tripods in this class. I like that the legs fold back 180 degrees which has helped protect my ballhead from banging against things while hiking. I like the twist-locks better than the flip-locks, even though they are not as frustration-free as I had hoped they would be. I did lose a few of the rubber feet off the bottom of the legs and had an issue with the angle locks at the top of the legs not staying in place, but Feisol was quick to respond to these issues and repaired them under warranty. They even repaired it quickly and sent it back via 2-day shipping so that I could have it in time for a trip. Definitely some of the best customer service that I have dealt with. I will be using some glue or epoxy to keep the rubber feet in place this time. This is another item I would highly recommend to outdoor nature and adventure photographers out there.



To sum things up, I am very please with this complete setup. It’s light weight, sturdy, easy to use, rugged and meets all of my requirements. It wasn’t the cheapest option out there, but everything works well together and I can rely on it in the field when I am trying to make images in harsh conditions. As you can see, the tripod also makes for a nice hat rack at camp! 😉

Peekaboo Camp

I hope this information is helpful to some of you out there, and if you have any questions, please feel free to leave a comment below and I’ll do my best to answer them.

Leave a Comment

What a View!

What a View!

I headed up on top of the Grand Mesa this evening to catch some of the fall colors. I was hoping to photograph the sunset from this location, but as you can see from the photo above, there wasn’t much of a view this evening. The very top of the Mesa was in the clouds and it was snowing pretty good. Luckily, I was able to drive back down off the Mesa a little bit to get under some of the clouds!

Leave a Comment